Here’s how I did it!
First I measured the handles on my pots and pans for which I will be using the “sleeve” for, so it will fit on all of them. I made a dome-like pattern that measured 3.5″x7.5″. Then, using that pattern I cut out 2 pieces of fabric and 2 pieces of Insul-Bright and sandwiched them together so the fabric connected to the Insul-Bright was facing down and the wrong-side of the patterned fabric was against the batting of the Insul-Bright.
I then basted around the edges to keep the fabric and the Insul-Bright together.
Then I folded down 1/2″ of the straight edge on the short side of the basted piece and zig-zag stitched it down, folding the fabric in to make a soft edge. (Of course using scrap bias tape would also work if you prefer that look instead.)
Now take both finished pieces and place the patterned fabric sides together and zig-zag stitch around the edges, careful not to sew the short, straight side which will be the opening.
Trim the edges so they are even, then turn inside out.
And that’s it!
Sew Easy, even a novice like me can do it!!